Electronic Racing Gauges Kit QA
Q1: The brightness is automatically dimmed when Shadow racing gauge is powered on.
A:
The automatic brightness dimming is a built-in program of Shadow racing gauge. When the racing gauge cannot detect the sensor signal input, it will automatically activate this mode. Please check whether the sensor connector latch is indeed tight, or check whether the cable set is in a bad connection.
Q2: Why does the backlight can’t switch in two colors when the side light is turned on?
A:
1. The sports meter controller of PRO3 is not used for related settings. Please follow the instruction manual and use the sports meter controller of PRO3 to set the backlight settings before and after the side lights are turned on.
2. The side lights actuator wiring harness are not connected. Please according to the instruction manual and install the side light actuator wiring harness in the corresponding position. Also make sure that it is not easy to loosen
Q3: Why there is a temperature error between water temperature electronic racing gauge and car OBD2 diagnostics tool?
A1:OEM temperature sensor is installed near the engine room, which has a higher temperature. It has an error range about 5℃.
A2: We do not recommend to install the sensor right on the top when installing the Radiator Hose Adapter. Because when the liquid passes through the water pipe, there might have space occur and let the liquid can't pass through the temperature sensor which will lead the temperature measurement inaccurately.
Q4:How to measure the engine radiator hose diameter and choose the correct adapter?
A: Please measure the outer diameter size first and then minus the wall thickness (Asian cars brands: 6mm/ European and American car brands: 8mm) and you can get the inner diameter.
Q5:If the hose diameter is measured as 33mm, should I choose 32mm or 34mm radiator hose adapter?
A: Please choose 32mm because the water pipe has high toughness and cannot be overstretched. It may not be able to install it successfully if you choose 34mm adapter. 32mm adapter can be fastened with an accessory hose clamps. If you encounter the similar situation, please use this suggestion to choose the corresponding accessories.
Need to destroy the line?
A: There is no need to destroy the wire.
Know you the best
SHADOW will not only be a pronoun of global automotive electronics products in the future, but also a good partner for modified car owners! Let more people experience the pleasure and convenience of modified vehicles through SHADOW's products!
Advantage
Water Temperature Racing Gauge Shadow water temperature racing gauge has sensitive pointers which can provide accurate water temperature at any time and prevent the water tank from overheating. The precise scale is matched with the LED six-segment... Read More