【Product】 EA888 series GEN3 & EVO4 quick-connect Boost Adaptor

Shadow EA888 Series quick-connect Boost Adaptor

From GOLF MK7 GTI to GOLF 8R, the EA888 series installed in the VAG car series 2.0TSI has continued to evolve, especially GEN3 and EVO4, which are modified engines that have not faded away in recent years. Thanks to the excellent soft and hard conditions, it is easy to obtain stronger power whether through ECU flashing or even modification.

After the engine is modified, it is very important to be able to check the boost value in real time. Even though OBD2 can now read the boost pressure provided by the ECU, it is still indirect information. Therefore, using a turbo boost gauge to read the boost pressure directly through the intake manifold is definitely the most accurate and direct way.

Shadow's newly developed quick-connect boost pressure adaptor is connected to the reserved hole in the original intake manifold. Use a drilling nail to cut a small hole and quickly snap it on to complete the installation. The installation is simple and fast.

The body is made of a composite material of aluminum alloy and polyacetal resin, and uses double-layer reinforced O-rings and reinforced buckles. It has the advantages of high rigidity and resistance to high temperatures and pressures. It has been measured to withstand high temperatures of 175゜C and 5.0 BAR boost pressure, even if you regularly pressurize it to a high pressure exceeding 2.0 BAR, it will still be stable and leak-proof.

Related Products

• 

  Boost Sensor Adaptor

  ---

  Boost sensor adaptors has the same sensor hole and thread size as factory engine, which can be directly inserted into the Vacuum/boost port of the original intake manifold. It can build up a reliable boost reference point for turbo boost gauge without any damage to your vehicle during installation.

  ---

---